Umang Marketing is the authorized distributors for wide range of international repute Hardcastle Lubricants & Coolants that includes Die-Casting Lubricants, Hot Forging Lubricants, Induatrial Lubricants, Cutting Coolants, Neat & Soluble Cutting Oils etc.
Umang also offer Hardcastle Rolling & Coating Oils, Rust Preventives, Cleaners, High Pressure Spray Cleaners, Solvent Cleaners, Fluid Power Products & Heat Treatment Products etc.
1. Industrial Lubricants
1.1 Hydraulic Oils
Antiwear , HLP type and Super Clean hydraulic oils ranging from VG 32 TO VG 150 grade
1.2 Gear Oils
High performance Gear oil ranging from 46 to 460 cst
1.3 Spindle Oils
Spindle oils especially suitable in machine tool industry for hydrodynamic spindle bearings in area of grinding spindles on finish grinding machines and on roller bearings intextile machinery.
1.4 Way Lubricants
Slideway Oils designed to provide optimum wear protection under continuous load available in VG46 to VG320 Grade.
1.5 Heat Transfer Oils
Mineral Oil as well as synthetic based Themic Fluids.
2. Die-Casting Lubricants
2.1 Dieface Lubricants
High performance water soluble and solvent based diecasting release agents for aluminium, zinc and magnesium castings.
2.2 Plunger Lubricants
Graphited and nongraphited liquid plunger lubricants for drip feed lubrication, sprayable or swabbing application in diecasting machines.
2.3 Piston Lubricants
Solid piston lubricants with excellent anti wear properties combined with very low consumption.
3. Hot Forging Lubricants
3.1 Water Dilutable Forging Lubricants
Spray Type water dilutable graphite based forging lubricants, for simple and critical forging applications for increased die life.
3.2 Oil Based Forging Lubricants
Oil and graphite based forging lubricants for better die life and more precise forgings with reduced smoke generation.
3.3 Graphite Free Synthetic Lubricant
Oil and graphite free synthetic forging lubricants for relatively simple forgings and warm forging applications.
4. Cutting Coolants
4.1 Neat Cutting Oils
For general machining as well as arduous machining processes such as hobbing, broaching, cold heading, thread rolling, honing, grinding, etc for Ferrous, non-ferrous materials, carbide cutting tools, etc.
4.2 Soluble Cutting Oils
Hardswater stable soluble cutting oils for ferrous and non ferrous machining operations.
4.3 Semi-synthetic Cutting Oils
Semi-synthetic ecofriendly and operator friendly cutting oils for long sump life and increased tool life.
4.4 Synthetic Cutting Oils
For grinding and general machining operations, ecofriendly and operator friendly. Special grinding fluids for Carbide tips and tools, glass grinding, etc.
4.5 Lapping Compounds
Water washable Lapping compounds with thixotropic properties for lapping of gears, pinions other parts for achieving excellent finish.
5. Rolling & Coating Oils
5.1 Rolling Oil
Synthetic and natural ester based rolling oils for cold rolling of steel sheets which are used as water based emulsions in reversing and tandem mills.
5.2 Pickling Oil
Rust Preventive Oil for application after pickling with HCL / H2SO4 having very good acid fume resistant charecteristics.
5.3 Coating Oil
Rust preventive Oils for application in skin pass mill for final coating.
6. Fluid Power Products
6.1 Oil in Water Emulsion
DGMS approved HFA type fluids for critical applications such as roof - support system in under groud mines.
6.2 Water in Oil Emulsion
DGMS approved invert emulsion type fluids for application such as SDLs /LHDs used in underground mines.
6.3 Water Glycol Fluids
High performance HFC type fluids designed to provide maximum fire resistance and optimum performance in die casting units, steel plants, foundries, mines, off-shore applications, power etc.
6.4 Anhydrous Synthetic Fluid
HFDU and HFDR type Anhydrous Esters designed to work at high operating pressures in alumium,steel, glass works etc.
7. Heat Treatment Products
7.1 Quenching & Tempering Oils
Martempering Oils for distortion control/prone components & long Service Life. Quenching oils for Bright Finish. Tempering Oil for hardened parts. Speciality Quenching Oils for customised needs. Water Washable quenching oils. Normal speed,Medium speed, Medium Fast & Fast speed Quenching oils.
7.2 Aqueous Quenchants
Polymer quenchants for Induction & tank Quenching. Advance Polymer quenchants for oil like quenching.
7.3 Salts
Neutral Hardening, Austempering & Marquenching salts. Carburising Salts. Blueing & Blackening Salts.
7.4 Carburizing Fluids
For Best Carburising Results
7.5 Blackening Oils
Tempering oil for Black corrosion protection polished surfaces.
8. Drawing Compounds
8.1 Wire Drawing
Water Dilutable for Copper & Steel wire drawing.
8.2 Deep Drawing Oils
Neat & Water Dilutable for Metal Forming & Deep Drawing of Sheet Metal components.
8.3 Sheet Metal Forming Oils
Neat & Water Dilutable for Stamping, Punching of Sheet Metal componentss.
8.4 Fin Stamping Oils
Solvent Based Fin stamping oil for punching, stamping, perforating of metal sheets for air conditioning & engine cooling systems.
9. Rust Preventives
9.1 Oil based
Oil based Rust preventives for in-prcess as well as final packing applications.
9.2 Water extendable
Water extendable offer the flexibility to choose optimum concentration to achieve desired protection.
9.3 Solvent based
Solvent based Rust Preventives for in-process as well as for end of the line applications.
10. Cleaners
10.1 Spray Cleaners
Dip & Spray Cleaners for Ferrous & Non-Ferrous metal parts.
10.2 High Pressure Spray Cleaners
High Pressure Cleaners for Critical applications.
10.3 Solvent Cleaners
Degreasing Cleaners for Critical application.
10.4 Ultrasonic Cleaners
Water Dilutable for Ferrous & Non-Ferrous Applications.
10.5 Immersion Cleaners
Cleaners for Dip type applications.
An engineering enterprise