Umang Marketing is the authorized distributors for wide range of international repute Everising Band Saw & Circular Saw Machines, Hi-Tech Band Saw, Pivot Type, Column Type & NC Control Type Fully Automatic Band Saw, Semi Automatic Band Saw, Miter Cutting Band Saws, Vericale Band Saw, Aluminium Cutting Band Saw, Ring Cutting Band Saw and Silicon Cut Saw Machines.
Circular Saw Machines
Circular saw provides many various for sawing machine that include the speed you want and the accyracy your product demands.
1. Circular Saw: Model P-75C / P-100C / P-150C / P-230B
P-75C
P-100C
STANDARD FEATURES:
Friendly and easy to operate touch screen
Hydraulic clamped front & vertical vises
Floating shuttle device
Hydraulic sorting chute
Electro-magnetic powder brake
Chip brush
Automatic loading table (5M) only for round bar
Saw blade 2 pcs
Automatic chip conveyor
Trasmission belt x 2 pcs
Cutting mist oil 5 gallons
One set of tools with tool box
P-150C
P-230B
OPTIONAL EQUIPMENT:
Air filter
Air compressor
Variable vise pressure
Cutting fluid coolant system
Air blow device for tube cutting
Individual power wire brush (Standard for P-150B)
TECHNICAL SPECIFICATIONS:
Model |
P-70C |
P-100C |
P-150C |
Capacity |
• |
10 - 70 mm |
15 - 100 mm |
70 - 150 mm |
▪
| 10 - 54 mm |
15 - 80 mm |
70 - 105 mm |
⁃
| 10 - 54 mm |
15 - 80 mm |
70 - 120 mm |
Blade Motor |
10 HP
| 15 HP |
20 HP |
Hydraulic Pump Motor |
2 HP
| 3 HP |
5 HP |
Blade Speed |
30 - 150 rpm
| 10 - 130 rpm |
Saw Blade Size (T:Kerf t:Thivkness) |
∅ 285 x T2.0 x 1.75t mm
| ∅ 360 x T2.6 x 2.25t mm |
∅ 460 x T2.7 x 2.25t mm |
Blade Feed |
Servo motor and ball screw
|
Load Table (W x L) |
1200 mm x 5200 mm
|
Bar Feed |
Servo motor and ball screw
|
Automatic Feed Length |
Single feed 8 - 600 mm Multiple feed - 3000 mm
| Single feed 10 - 700 mm Multiple feed - 3000 mm
|
Automatic Chip Conveyor |
Chain type
|
Cooling |
Air compressed oil mist
|
Machine Weight with Table |
3200 kg
| 3900 kg
| 4900 kg
|
Floor Space (mm) |
Machine With 5W Load Table |
2700 W x 1900 L 2700 W x 6835 L
| 2900 W x 1900 L 2900 W x 6835 L
| 3100 W x 2075 L 3100 W x 7175 L
|
Fully Automatic Band Saw Machines
1. Pivot Type Fully Automatic Band Saw: Model S-250HA/S-250HB & S-300HB
S-250HA/S-250HB
S-300HB
STANDARD FEATURES:
United construction-(bar feed and saw are on one base)
Shuttle type automatic feed
PLC control for all electric and hydraulic functions
Hydraulically controlled dual vise clamping system
Floating shuttle vise system (Except S-250HA)
Split front vise
Infinitely variable speed control by inverter
Blade speed tachometer
Hydraulic blade tensioning (Except S-250HA)
Roller bearing with carbide blade guide system
Automatic work height control by fast approach bar sensor
Preset cut counter with shut off
Out of stock shut off
Multiple indexing (9 times)
Nesting fixture for bundle cutting
Power driven blade cleaning brush
Idler wheel motion detector with blade stalling and breakage shut off
Flushing hose for machine cleaning
Work light
Roller stock table 2M long
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Automatic chip conveyor
Variable vise pressure
User friendly NC touch screen control with self-diognostic system
Full stroke vise clamping system
TECHNICAL SPECIFICATIONS:
Model |
S-250HA |
S-250HB |
S-300HB |
Capacity |
• |
250 mm (10") |
300 mm (12") |
▪
| 300 x 250 mm (12"W x 10"H) |
300 x 250 mm (12"W x 10"H) |
Bundle Cutting |
Width
| 145 to 190 mm (5.7" to 7.5") |
145 to 230 mm (5.7" to 9") |
Height
| 30 to 120 mm (1.2" to 4.5") |
30 to 130 mm (1.2" to 5") |
Blade Speed |
50Hz
| 20 to 100 mm/min (65 to 330 fpm) |
20 to 100 mm/min (65 to 330 fpm) |
60Hz
| (INVERTER) |
(INVERTER) |
Motor |
Blade Drive
| 2.2 kw (3HP) |
3.7 kw (5HP) |
3.7 kw (5HP) |
Hyd. Pump
| 0.75 kw (1HP) |
0.75 kw (1HP) |
0.75 kw (1HP) |
Coolant Pump
| 0.1 kw (1/8HP) |
0.1 kw (1/8HP) |
0.1 kw (1/8HP) |
Blade Size
| 3505x27x0.9 mm (138"x1"x0.035") |
3505x34x1.1 mm (138"x1.3"x0.042") |
3505x24x1.1 mm (150"x1.3"x0.042") |
Blade Tension
| Spring Loaded-manual |
Hydraulic |
Index Length
| 400 mm (16") 400 mm x 9 times (16" x 9) |
Machine Weight
| 1410 kg (3100 lb) |
1460 kg (3215 lb) |
1550 kg (3417 lb) |
Floor Space (L x W)
| 2100 x 2200 mm (82.6" x 86.6") |
2100 x 2200 mm (82.6" x 86.6") |
2. Pivot Type Fully Automatic Band Saw: Model S-400HB & S-460HB
S-400HB
S-460HB
STANDARD FEATURES:
United construction (bar feed and saw are on one base)
Shuttle type automatic feed
PLC control for all electric and hydraulic functions
Hydraulically controlled dual vise clamping system
Floating shuttle vise system
Split front vise
Infinitely variable speed control by inverter
Blade speed tachometer
Hydraulic blade tensioning
Roller bearing with carbide blade guide system
Automatic work height control by fast approach bar sensor
Preset cut counter with shut off
Out of stock shut off
Multiple indexing (9 times)
Nesting fixture for bundle cutting
Power driven blade cleaning brush
Idler wheel motion detector with blade stalling and breakage shut off
Flushing hose for machine cleaning
Work light
Roller stock table 2M long
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Automatic chip conveyor
Variable vise pressure
User friendly NC touch screen control with self-diognostic system
Full stroke vise clamping system
TECHNICAL SPECIFICATIONS:
Model |
S-400HA |
S-460HB |
Capacity |
• |
420 mm (16.5") |
460 mm (18") |
▪
| 420 x 420 mm (16.5"W x 16.5"H) |
460 x 460 mm (18"W x 18"H) |
Bundle Cutting |
Width
| 195 to 300 mm (8" to 12") |
195 to 350 mm (8" to 14") |
Height
| 90 to 200 mm (3.5" to 8") |
125 to 230 mm (5" to 9") |
Blade Speed |
20 to 100 mm/min (65 to 330 fpm) (INVERTER) |
Motor |
Blade Drive
| 5.5 kw (7.5HP) |
Hyd. Pump
| 1.5 kw (2HP) |
Coolant Pump
| 0.2 kw (1/4HP) |
Blade Size
| 4570x41x1.3 mm (180"x1.6"x0.05") |
4670x41x1.3 mm (184"x1.6"x0.005") |
Blade Tension
| Hydraulic |
Index Length
| 500 mm (20") 500 mm x 9 times (20" x 9) |
Machine Weight
| 2360 kg (5190 lb) |
2400 kg (5260 lb) |
Floor Space (L x W)
| 2590 x 2180 mm (102" x 85.8") |
2645 x 2180 mm (104.1" x 85.8") |
3. Column Type Fully Automatic Band Saw: Model H-260HB & H-460HA
H-260HB
H-460HA
STANDARD FEATURES:
Shuttle type automatic feed
PLC control for all electric and hydraulic functions
Hydraulically controlled dual vise full stroke clamping system. (only for H-260HB)
Floating shuttle vise system
Split front vise
Infinitely variable speed control by inverter
Blade speed tachometer
Hydraulic blade tensioning
Roller bearing with carbide blade guide system
Automatic work height control by fast approach bar sensor
Preset cut counter with shut off
Out of stock shut off
Multiple indexing (9 times)
Nesting fixture for bundle cutting
Power driven blade cleaning brush
Additional coolant supply from fast approach bar (only for H-460HA)
Idler wheel motion detector with blade stalling and breakage shut off
Flushing hose for machine cleaning
Work light
Roller stock table 2M long
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Automatic chip conveyor
Variable vise pressure
User friendly NC touch screen control with self-diognostic system
Full stroke vise clamping system
Out of square detector (only for H-460HA)
Anti-vibration device on fast approach (only for H-460HA)
TECHNICAL SPECIFICATIONS:
Model |
H-260HB |
H-360HA |
H-460HA |
Capacity |
• |
260 mm (10.25") |
360 mm (14") |
460 mm (18") |
▪
| 310 x 260 mm (12"W x 10.25"H) |
360 x 360 mm (14"W x 14"H) |
500 x 460 mm (20"W x 18"H) |
Bundle Cutting |
Width
| 145 to 190 mm (6" to 8") |
180 to 280 mm (7" to 11") |
195 to 310 mm (8" to 12") |
Height
| 30 to 130 mm (1.2" to 5") |
50 to 160 mm (2" to 6") |
120 to 230 mm (5" to 9") |
Blade Speed |
20 to 100 mm/min (65 to 330 fpm) (INVERTER) |
Motor |
Blade Drive
| 3.7 kw (5HP) |
5.5 kw (7.5HP) |
Hyd. Pump
| 0.75 kw (1HP) |
1.5 kw (2HP) |
1.5 kw (2HP) |
Coolant Pump
| 0.1 kw (1/8HP) |
0.2 kw (1/4HP) |
Blade Size
| 3920x34x1.1 mm (155"x1.3"x0.042") |
4420x34x1.1 mm (174"x1.3"x0.042") |
5450x41x1.3 mm (215"x1.6"x0.05") |
Blade Tension
| Hydraulic |
Index Length
| 400 mm (16") 400 mm x 9 times (16" x 9) |
500 mm (20") 500 mm x 9 times (20" x 9) |
Machine Weight
| 1750 kg (3860 lb) |
2000 kg (4410 lb) |
2700 kg (5950 lb) |
Floor Space (L x W)
| 2170 x 2100 mm (85" x 83") |
2500 x 2200 mm (98" x 87") |
2820 x 2190 mm (111" x 86") |
4. Column Type Fully Automatic Band Saw: Model H-560HA
H-560HA
STANDARD FEATURES:
Shuttle type automatic feed
PLC control for all electric and hydraulic functions
Hydraulically controlled dual vise clamping system
Floating shuttle vise system
Split front vise
Infinitely variable speed control by inverter
Blade speed tachometer
Hydraulic blade tensioning
Roller bearing carbide blade guide system with hydraulic clamped
Auxiliary lifting cylinder
Automatic work height control by fast approach bar sensor
Preset cut counter with shut off
Out-of-stock shut off
Multiple indexing (9 times)
Power driven blade cleaning brush
Idler wheel motion detector with blade stalling and breakage shut off
Flushing hose for machine cleaning
Work light
Roller stock table 2M long
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Automatic chip conveyor
Variable vise pressure
User friendly NC touch screen control with self-diognostic system
Out of square detector
TECHNICAL SPECIFICATIONS:
Model |
H-560HA |
Capacity |
• |
560 mm (22") |
▪
| 615 x 560 mm (24.2"W x 22"H) min. clamp width 110mm (4.3") |
Blade Speed |
18 to 90 mm/min (65 to 330 fpm) (INVERTER) |
Motor |
Blade Drive
| 7.5 kw (10HP) |
Hyd. Pump
| 2.2 kw (3HP) |
Coolant Pump
| 0.2 kw (1/4HP) |
Blade Size
| 6600x54x1.6 mm (260"x2.1"x0.0632") |
Blade Tension
| Hydraulic |
Index Length
| 400 mm (16") 400 mm x 9 times (16" x 9) |
Machine Weight (Approx.)
| 4500 kg (9920 lb) |
Floor Space (L x W)
| 3400 x 2190 mm (134" x 86") |
5. Column Type Fully Automatic Band Saw: Model H-700HANC
H-700HANC
STANDARD FEATURES:
Shuttle type automatic feed
PLC control for all electric and hydraulic functions
Hydraulically controlled dual vise clamping system
Floating shuttle vise system
Variable blade speed controlled by inverter
Hydraulic actuated carbide blade guides
HMI/PLC user friendly touch screen with self-diognosis system
NC control with 9 working jobs
Adjustable hydraulic pressure & feed control on control panel
Hydraulic blade tensioning
Roller bearing carbide blade guide system with hydraulic clamped
Automatic work height control by fast approach bar sensor
Out of stock shut off
Roller type work table
Power driven blade cleaning brush
Idler wheel motion detector with blade stalling and breakage shut off
Flushing hose for machine cleaning
Independent electric cabinet and control panel
Automatic chip conveyor
Work light
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Dead roller conveyor, 2 M long
Out of square detector
TECHNICAL SPECIFICATIONS:
Model |
H-700HANC |
Capacity |
• |
700 mm (28") |
▪
| 800 x 700 mm (31.5"W x 28"H) min. clamp width 285mm (11.2") |
Blade Speed |
15 to 75 mm/min (50 to 250 fpm) (INVERTER) |
Motor |
Blade Drive
| 7.5 kw (10HP) |
Hyd. Pump
| 2.2 kw (3HP) |
Coolant Pump
| 0.2 kw (1/4HP) |
Blade Size
| 8000x54x1.6 mm (315"x2.1"x0.063") |
Blade Tension
| Hydraulic |
Index Length
| 500 mm (20") Controlled by NC |
Machine Weight (Approx.)
| 7000 kg (15400 lb) |
Floor Space (L x W)
| 4100 x 2300 mm (161.4" x 90.5") |
6. NC Control, Column Type Fully Automatic Band Saw: Model H-7065HANC / NC-700HA
H-7065HANC/NC-700HA
STANDARD FEATURES:
Machine design suitable for using TCT saw blade
Extreme duty transmission
Variable blade speed controlled by inverter
Guide arm travels on linear guide way and moves in coordination with the movable vise jaw
Auto trim cut and initial cut positioning
Close approach vise reduces remnants
Hydraulically full stroke dual vise clamping system with flating vises
PLC control for all electric and hydraulic functions
HMI/PLC user friendly touch screen with self diagnosis system
NC control with 9 working jobs
Adjustable hydraulic pressure & feed control on control panel
Automatic work height control by fast approach bar sensor
Power driven blade cleaning brush
Out of stock shut off
Blade anti-vibration device
Hydraulic blade tensioning
Idler wheel motion detector with blade stalling and breakage shut off
Hydraulic actuated carbide blade guides
Roller type work table
Independent electric cabinet and control panel
Automatic chip conveyor
Flushing hose for machine cleaning
Work light
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Dead roller conveyor, 2 M long
Out of square detector
NC valve with fully CNC type control
Additional portable control panel
TECHNICAL SPECIFICATIONS:
Model |
H-7065HANC |
NC-700HA |
Capacity |
• |
650 mm (25.6") |
700 mm (28") |
▪
| 700 x 650 mm (31.5"W x 25.6"H) min. clamp width 190 mm (7.5") |
800 x 700 mm (31.5"W x 28"H) min. clamp width 285 mm (11.2") |
Blade Speed |
15-75 m/min (50-250 fpm) (INVERTER) |
15-90 m/min (50-300 fpm) (INVERTER) |
Motor |
Blade Drive
| 7.5 kw (10HP) |
11.2 kw (15HP) |
Hyd. Pump
| 2.2 kw (3HP) |
3.7 kw (5HP) |
Coolant Pump
| 0.2 kw (1/4HP) |
0.4 kw (1/2HP) |
Blade Size
| 7600x54x1.6 mm (300"x2.1"x0.063") |
8300x67x1.6 mm (327"x2.63"x0.063") |
Blade Tension
| Hydraulic |
Index Length
| 500 mm (20") Controlled by NC |
Machine Weight (Approx.)
| 6000 kg (13200 lb) |
7000 kg (15400 lb) |
Floor Space (L x W)
| 3800 x 2200 mm (149.6" x 86.6") |
4100 x 2300 mm (161.4" x 90.5") |
7. NC Control, Column Type Fully Automatic Band Saw: Model H-800HANC / H-1070HANC
H-800HANC/H-1070HANC
STANDARD FEATURES:
Machine design suitable for using TCT saw blade
Extreme duty transmission
Variable blade speed controlled by inverter
Guide arm travels on linear guide way and moves in coordination with the movable vise jaw
Auto trim cut and initial cut positioning
Close approach vise reduces remnants
Hydraulically full stroke dual vise clamping system with flating vises
PLC control for all electric and hydraulic functions
HMI/PLC user friendly touch screen with self diagnosis system
NC control with 9 working jobs
Adjustable hydraulic pressure & feed control on control panel
Power driven blade cleaning brush
Automatic work height control by fast approach bar sensor
Out of stock shut off
Blade anti-vibration device
Hydraulic blade tensioning
Idler wheel motion detector with blade stalling and breakage shut off
Hydraulic actuated carbide blade guides
Roller type work table
Independent electric cabinet and control panel
Automatic chip conveyor
Flushing hose for machine cleaning
Work light
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Dead roller conveyor, 2 M long (only for H-800HANC)
Dead roller conveyor, 3 M long
Out of square detector
NC valve with fully CNC type control
Additional portable control panel
TECHNICAL SPECIFICATIONS:
Model |
H-800HANC |
NC-1070HANC |
Capacity |
• |
800 mm (31.5") |
700 mm (28") |
▪
| 800 x 800 mm (31.5"W x31.5"H) min. clamp width 285 mm (11.2") |
1000 x 700 mm (40"W x 28"H) min. clamp width 585 mm (23") |
Blade Speed |
15-90 m/min (50-300 fpm) (INVERTER) |
15-80 m/min (50-265 fpm) (INVERTER) |
Motor |
Blade Drive
| 11.2 kw (15HP) |
11.2 kw (15HP) |
Hyd. Pump
| 3.7 kw (5HP) |
3.7 kw (5HP) |
Coolant Pump
| 0.4 kw (1/2HP) |
0.4 kw (1/2HP) |
Blade Size
| 8720x67x1.6 mm (343.5"x2.63"x0.063") |
8800x67x1.6 mm (346.5"x2.63"x0.063") |
Blade Tension
| Hydraulic |
Index Length
| 500 mm (20") Controlled by NC |
Machine Weight (Approx.)
| 7600 kg (16720 lb) |
8500 kg (18700 lb) |
Floor Space (L x W)
| 4100 x 2300 mm (161.4" x 90.5") |
4500 x 2300 mm (177" x 90.5") |
8. NC Control, Column Type Fully Automatic Band Saw: Model H-1100HANC
H-1100HANC
STANDARD FEATURES:
Machine design suitable for using TCT saw blade
Extreme duty transmission
Variable blade speed controlled by inverter
Guide arm travels on linear guide way and moves in coordination with the movable vise jaw
Auto trim cut and initial cut positioning
Close approach vise reduces remnants
Hydraulically full stroke dual vise clamping system with flating vises
PLC control for all electric and hydraulic functions
HMI/PLC user friendly touch screen with self diagnosis system
NC valve with fully CNC control with 9 working jobs
Adjustable hydraulic pressure & feed control on control panel
Power driven blade cleaning brush
Automatic work height control by fast approach bar sensor
Out of stock shut off
Blade anti-vibration device
Hydraulic blade tensioning
Idler wheel motion detector with blade stalling and breakage shut off
Hydraulic actuated carbide blade guides
Roller type work table
Independent electric cabinet and control panel
Additional portable control panel
Automatic chip conveyor
Flushing hose for machine cleaning
Work light
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Dead roller conveyor, 3 M long
Out of square detector
NC valve with fully CNC type control
TECHNICAL SPECIFICATIONS:
Model |
H-1100HANC |
Capacity |
• |
1000 mm (40") |
▪
| 1100 x 1000 mm (43.3"W x 40"H) min. clamp width 400mm (15.7") |
Blade Speed |
15 to 75 mm/min (50 to 250 fpm) (INVERTER) |
Motor |
Blade Drive
| 11.2 kw (15HP) |
Hyd. Pump
| 3.7 kw (5HP) |
Coolant Pump
| 0.4 kw (1/2HP) |
Blade Size
| 11100x80x1.6 mm (437"x3"x0.063") |
Blade Tension
| Hydraulic |
Index Length
| 500 mm (20") Controlled by NC |
Machine Weight
| 14000 kg (30800 lb) |
Floor Space (L x W)
| 5150 x 2715 mm (203" x 107") |
9. NC Control, Column Type Fully Automatic Band Saw: Model NC-460HB
NC-460HB
STANDARD FEATURES:
Machine design suitable for using TCT saw blade
Machine construction by full enclosure protection cover
Extreme duty transmission
Rigid dual column with linear guide way
Variable blade speed controlled by inverter
Guide arm travels on linear guide way and moves in coordination with the movable vise jaw
Auto trim cut and initial cut positioning
Close approach vise reduces remnants
Hydraulically full stroke dual vise clamping system with flating vises
PLC control for all electric and hydraulic functions
HMI/PLC user friendly touch screen with self diagnosis system
NC valve with fully CNC control with 9 working jobs
Built-in cutting data of variety material with blade speed and cutting speed
Power driven blade cleaning brush
Automatic work height control by fast approach bar sensor
Out of stock shut off
Blade anti-vibration device
Hydraulic blade tensioning
Idler wheel motion detector with blade stalling and breakage shut off
Hydraulic actuated carbide blade guides
Roller type work table
Automatic chip conveyor
Flushing hose for machine cleaning
Work light
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Dead roller conveyor, 2 M long
Automatic loading system for 3 pcs of cutting material
TECHNICAL SPECIFICATIONS:
Model |
NC-460HB |
Capacity |
• |
460 mm (18") |
▪
| 460 x 460 mm (18"W x 18"H) min. clamp width 285mm (11.2") |
Blade Speed |
15 to 90 mm/min (50 to 300 fpm) (INVERTER) |
Motor |
Blade Drive
| 7.5 kw (10HP) |
Hyd. Pump
| 2.2 kw (3HP) |
Coolant Pump
| 0.2 kw (1/4HP) |
Blade Size
| 6600x54x1.6 mm (260"x2.1"x0.063") |
Blade Tension
| Hydraulic |
Index Length
| 500 mm (20") Controlled by NC |
Machine Weight
| 5400 kg (11880 lb) |
Floor Space (L x W)
| 4275 x 2100 mm (168.3" x 82.7") |
Semi Automatic Billet Saw
1. Billet Type Semi Automatic Saw: Model H-360SA
H-360SA
STANDARD FEATURES:
Column type down feed system with sealed bearings
Hydraulic blade tension
Roller bearing with carbide blade guide system
Split front vise
Power driven wire brush
Automatic work height control by fast approach
Idler wheel motion detector with blade stalling and breakage shut off
Hydraulic work lift roller with manual ratchet feed (Roller type work table). (Alternative flat type work table without hydraulic lift roller)
Cutting fluid flushing hose for machine cleaning
Discharge side table with auxliary plate
Length stopper
Work light
Roller stock table 2M long
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Automatic chip conveyor
Variable vise pressure
2. Billet Type Semi Automatic Saw: Model H-5550 / H-7050
H-5550/H-7050
STANDARD FEATURES:
Column type down feed system with sealed bearings
Hydraulic blade tension
Roller bearing hydraulically clamped carbide blade guide system
Hydraulic work lift roller with manual ratchet feed
Split front vise
Power driven wire brush
Infeed and outfeed dead roller conveyors
Idler wheel motion detector with blade stalling and breakage shut off
Automatic saw frame return selector
Cutting fluid flushing hose for machine cleaning
Cut line projection light
Roller stock table 2M long
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Infinitely variable speed controlled by inverter
Automatic chip conveyor
Variable vise pressure
TECHNICAL SPECIFICATIONS:
Model |
H-360SA |
H-5550 |
H-7050 |
Capacity |
• |
360 mm (14") |
500 mm (20") |
500 mm (20") |
▪
| 360 x 360 mm (14"W x 14"H) |
550 x 500 mm (22"W x 20"H) |
700 x 500 mm (28"W x 20"H) |
Blade Speed |
-
| 20 to 100 m/min (65 to 330 fpm) (INVERTER) |
17, 25, 35, 45, 65, 75 m/min (55, 80, 115, 150, 180, 215, 250 fpm) |
Motor |
Blade Drive
| 3.7 kw (5HP) |
5.5 kw (7.5HP) |
Hyd. Pump
| 1.5 kw (2HP) |
1.5 kw (2HP) |
Coolant Pump
| 0.1 kw (1/8HP) |
0.2 kw (1/4HP) |
Blade Size
| 4420x34x1.1 mm (174"x1.3"x0.043") |
4880x41x1.3 mm (192"x1.6"x0.05") |
5450x41x1.3 mm (214.6"x1.6"x0.05") |
Blade Tension
| Hydraulic |
Index Length
| -
| -
| - |
Machine Weight
| 1650 kg (3630 lb) |
2100 kg (4620 lb) |
2400 kg (5280 lb) |
Floor Space (L x W)
| 2500 x 1500 mm (98.4" x 59") |
2550 x 1900 mm (98.4" x 74.8") |
2700 x 2000 mm (106.3" x 78.7") |
3. Billet Type Semi Automatic Band Saw: Model H-7056
H-7056
STANDARD FEATURES:
Hydraulically controlled dual vise full stroke clamping system
Roller bearing hydraulically clamped carbide blade guide system
Auxiliary lifting cylinder
Variable blade speed controlled by inventer
Power driven wire brush
Hydraulic blade tension
Floating shuttle vise
PLC control for all electric and hydraulic functions
Idler wheel motion detector with blade stalling and breakage shut off
Automatic saw frame return selector
Saw frame height selector gauge
Cutting fluid flushing hose for machine cleaning
Projection light
Roller stock table 2M long
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Automatic chip conveyor
Variable vise pressure
Out of square detector
4. Billet Type Semi Automatic Band Saw: Model H-8276 V/T
V: Hydraulic Vise Feeding / T: Hydraulic Shuttle Table Feeding
Billet Type: H-8276 V/T
STANDARD FEATURES:
T type: Hydraulic shuttle table feeding. V type: Hydraulic vise feeding
Hydraulically controlled dual vise full stroke clamping system
Roller bearing hydraulically clamped carbide blade guide system
Variable blade speed controlled by inventer
Saw frame height selector gauge
Power driven wire brush
Hydraulic blade tension
Powered movable guide arm with hydraulic lock
PLC control for all electric and hydraulic functions
Independent electric cabinet and control panel
Idler wheel motion detector with blade stalling and breakage shut off
Automatic saw frame return selector
Cutting fluid flushing hose for machine cleaning
Automatic chip conveyor
Additional portable control box
Projection light
One set of bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Dead roller table, 2 meter long
Power roller table, 2 meter long
Out of square detector
TECHNICAL SPECIFICATIONS:
Model |
H-7056 |
H-8276 V/T |
Capacity |
• |
560 mm (22") |
760 mm (30") |
▪
| 700 x 560 mm (28"W x 22"H) min. clamp with 75 mm (3") |
820 x 760 mm (32.3"W x 30"H) min. clamp with 285 mm (11.2") |
Blade Speed |
- |
20 to 80 m/min (65 to 264 fpm) (INVERTER)
| 15 to 75 m/min (50 to 250 fpm) (INVERTER) |
Motor |
Blade Drive
| 7.5 kw (10HP) |
7.5 kw (10HP) |
Hyd. Pump
| 2.2 kw (3HP) |
2.2 kw (3HP) |
Coolant Pump
| 0.2 kw (1/4HP) |
0.2 kw (1/4HP) |
Blade Size
| 6800x54x1.6 mm (267"x2.1"x0.063") |
8000x54x1.6 mm (315"x2"x0.063") |
Blade Tension
| Hydraulic |
Index Length
| 300 mm (11.8")
| 500 mm (20")(V); 400 mm (15.7")(T) |
Machine Weight
| 4200 kg (9240 lb) |
7000 kg (15400 lb) |
Floor Space (L x W)
| 3700 x 2200 mm (145.6" x 86.6") |
4100 x 2200 mm (161.4" x 86.6") |
5. Billet Type Semi Automatic Band Saw: Model H-8070 & H-1010
H-8070
H-1010
STANDARD FEATURES:
Column type down feed system with sealed bearings
Variable blade speed controlled by inventer
Hydraulically controlled dual vise full stroke clamping system
Roller bearing hydraulically clamped carbide blade guide system
PLC control for all electric and hydraulic functions
Saw frame height selector gauge
Power driven wire brush
Hydraulic blade tension
Anti-vibration roller
Powered movable guide arm with hydraulic lock (Only for H-1010)
Independent electric cabinet and control panel
Idler wheel motion detector with blade stalling and breakage shut off
Automatic saw frame return selector
Cutting fluid flushing hose for machine cleaning
Automatic chip conveyor
Projection light
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Out of square detector
Dead roller stock table - 2M long for H-8070, 3M long for H-1010
Power roller stock table - 2M long for H-8070, 3M long for H-1010
TECHNICAL SPECIFICATIONS:
Model |
H-8070 |
H-1010 |
Capacity |
• |
700 mm (27.5") |
1000 mm (40") |
▪
| 800 x 700 mm (31.5"W x 27.5"H) min. clamp with 230 mm (9") |
1000 x 1000 mm (40"W x 40"H) min. clamp with 570 mm (22.5") |
Blade Speed |
- |
15 to 70 m/min (50 to 230 fpm) (INVERTER) |
Motor |
Blade Drive
| 7.5 kw (10HP) |
11.5 kw (15HP) |
Hyd. Pump
| 2.2 kw (3HP) |
3.7 kw (5HP) |
Coolant Pump
| 0.2 kw (1/4HP) |
0.2 kw (1/4HP) |
Blade Size
| 7600x54x1.6 mm (299"x2"x0.063") |
8800x67x1.6 mm (346 1/2"x2.5/8"x0.063") |
Blade Tension
| Hydraulic |
Hydraulic |
Index Length
| 450 mm (17.5")
| 500 mm (20") |
Machine Weight
| 5500 kg (12100 lb) |
9500 kg (20900 lb) |
Floor Space (L x W)
| 3950 x 2220 mm (141" x 87.5") |
4150 x 2280 mm (163.5" x 90") |
6. Billet Type Semi Automatic Band Saw: Model H-1100 V/T
V: Hydraulic Vise Feeding / T: Hydraulic Shuttle Table Feeding
H-1100 V/T
STANDARD FEATURES:
T type: Hydraulically shuttle table, V type: Hydraulic vise feeding
Hydraulically controlled dual vise full stroke clamping system
Roller bearing hydraulically clamped carbide blade guide system
Auxiliary lifting cylinder
Variable blade speed controlled by inventer
Individual motor drive power wire brush
Power driven wire brush
Hydraulic blade tension
Floating shuttle vise for V type only
PLC control for all electric and hydraulic functions
Idler wheel motion detector with blade stalling and breakage shut off
Saw frame height selector gauge
Automatic saw frame return selector
Cutting fluid flushing hose for machine cleaning
Automatic chip conveyor
Independent electric cabinet and control panel
Projection light
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Out of square detector
Dead roller table, 3 M long
Power roller table, 3 M long
7. Billet Type Semi Automatic Band Saw: Model H-1300 / H-1613
H-1300/H-1613
STANDARD FEATURES:
Column type down feed system with sealed bearings
Variable blade speed controlled by inventer
Hydraulically controlled dual vise full stroke clamping system
Roller bearing hydraulically clamped carbide blade guide system
PLC control for all electric and hydraulic functions
Saw frame height selector gauge
Power driven wire brush
Hydraulic blade tension
Anti-vibration roller
Powered movable guide arm with hydraulic lock
Independent electric cabinet and control panel
Idler wheel motion detector with blade stalling and breakage shut off
Automatic saw frame return selector
Cutting fluid flushing hose for machine cleaning
Automatic chip conveyor
Projection light
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Out of square detector
Dead roller table, 3 M long
Power roller table, 3 M long
1.8M shuttle table
TECHNICAL SPECIFICATIONS:
Model |
H-1100 V/T |
H-1300 |
H-1613 |
Capacity |
• |
1000 mm (40") |
1300 mm (52") |
1300 mm (52") |
▪
| 1100 x 1000 mm (43.3"W x 40"H) min. clamp with 400 mm (15.7") |
1300 x 1300 mm (52"W x 52"H) min. clamp with 570 mm (22.5") |
1600 x 1300 mm (63"W x 52"H) min. clamp with 710 mm (27.5") |
Blade Speed |
- |
15 to 75 m/min (50 to 250 fpm) (INVERTER)
| 15 to 70 m/min (50 to 230 fpm) (INVERTER) |
Motor |
Blade Drive
| 11.5 kw (15HP) |
15 kw (20HP) |
Hyd. Pump
| 3.7 kw (5HP) |
3.7 kw (5HP) |
Coolant Pump
| 0.2 kw (1/4HP) |
0.2 kw (1/4HP) |
Blade Size
| 11100x80x1.6 mm (437"x3"x0.063") |
12300x54x1.6 mm (484"x3"x0.063") |
13000x80x1.6 mm (511"x3"x0.063") |
Blade Tension
| Hydraulic |
Index Length
| 500 mm (20")
| 600 mm (23.6") |
Machine Weight
| 14000 kg (30800 lb) |
16000 kg (35200 lb) |
20000 kg (44000 lb) |
Floor Space (L x W)
| 5070 x 2650 mm (199.6" x 104.3") |
5600 x 2800 mm (220.5" x 110") |
5950 x 2800 mm (234" x 110") |
8. Billet Type Semi Automatic Band Saw: Model H-1616 / H-1816 & H-2116
H-1616/H-1816
H-2116
STANDARD FEATURES:
Idler wheel motion detector with blade stalling and breakage shut off
Hydraulic blade tension
Hydraulic blade tension
Individual motor drive power wire brush
Cutting fluid flushing hose for machine cleaning
Column type down feed system with sealed bearings
Automatic saw frame return selector
Saw frame height selector gauge
Projection light
Roller bearing hydraulically clamped carbide blade guide system
Hydraulic shuttle table
One set of heavy construction vise
Fence plate on discharge side
Anti-vibration roller
Powered movable guide arm with hydraulic lock
Variable blade speed controlled by inventer
Automatic chip conveyor
One M42 bimetal saw blade
One set of tools and tool box
OPTIONAL EQUIPMENT:
Out of square detector
Dead roller table, 3 M long
Power roller table, 3 M long
NC valve for down feed speed + HMI control panel
Auxliary vise 1 set
TECHNICAL SPECIFICATIONS:
Model |
H-1616 V/T |
H-1816 |
H-2116 |
Capacity |
• |
1600 mm (63") |
1600 mm (63") |
1600 mm (63") |
▪
| 1600 x 1600 mm (63"W x 63"H) min. clamp with 600 mm (23.6") |
1800 x 1600 mm (71"W x 63"H) min. clamp with 600 mm (23.6") |
2100 x 1600 mm (82.7"W x 63"H) min. clamp with 600 mm (23.6") |
Blade Speed |
- |
12 to 60 m/min (40 to 200 fpm) (INVERTER) |
Motor |
Blade Drive
| 15 kw (20HP) |
Hyd. Pump
| 5.5 kw (7.5HP) |
Coolant Pump
| 0.4 kw (1/2HP) |
Blade Size
| 15500x80x1.6 mm (484"x3"x0.063") |
15900x80x1.6 mm (626"x3"x0.063") |
16500x80x1.6 mm (649.6"x3"x0.063") |
Blade Tension
| Hydraulic |
Index Length
| 1800 mm (70.9")
|
Machine Weight
| 31500 kg (69300 lb) |
33000 kg (72600 lb) |
36000 kg (79200 lb) |
Floor Space (L x W)
| 7350 x 4900 mm (289.3" x 192.9") |
7610 x 4700 mm (299.6" x 185") |
7920 x 4810 mm (311.8" x 189.3") |
Miter Cutting Band Saw
Miter cutting band saw is versatile, economical, bidirection miter cutting band sawing machine & fully automatic miter cutting band sawing machine.
1. Miter Cutting Band Saw: Model S-4633SA / S-6240SA
S-4633SA
S-6240SA
STANDARD FEATURES:
Bidirection angle swivel -60° ~ 0° ~ +45° with scale incator
Blade breakage detector device
Blade cleaning brush
Hydraulic flow down feed control
Hydraulic vise clamping - rack type
Working light
Roller stack table, 2M long (Except S-4633SA)
One piece of bimetal saw blade
One set of tools with tool box
OPTIONAL EQUIPMENT:
Nesting fixture for bundle cutting
Variable vise pressure
Variable blade speed by inverter (for S-4633SA)
Roller stock table, 1.5M long (for S-4633SA)
TECHNICAL SPECIFICATIONS:
Model |
S-4633SA |
S-6240SA |
S-82465SA |
Capacity |
0 |
• ▪ |
300 mm (13") 460 x 305 mm (18" W x 12" H) |
400 mm (15.7") 620 x 400 mm (24.5" W x 15.7" H) |
460 mm (18") 820 x 460 mm (32.3" W x 18" H) |
±45° |
• ▪
| 300 mm (13") 305 x 305 mm (12" W x 12" H) |
400 mm (15.7") 420 x 400 mm (16.5" W x 15.7" H) |
460 mm (18") 550 x 460 mm (21.5" W x 18" H) |
-60° |
• ▪ |
250 mm (10") 250 x 250 mm (10" W x 10" H) |
300 mm (12") 290 x 400 mm (11.5" W x 15.7" H) |
380 mm (15") 380 x 460 mm (15" W x 18" H) |
Blade Motor |
25, 45, 70, 100 m/min (83, 150, 230,330 fpm)
| 20, 45, 70, 100 m/min (65, 150, 230,330 fpm) |
20 to 100 m/min (65 to 330 fpm) |
Motor |
Blade Drive
| 2.2 kw (3 HP) |
3.7 kw (5 HP) |
5.5 kw (7.5 HP) |
Hydraulic Pump
| 0.4 kw (1/2 HP) |
0.75 kw (1 HP) |
1.5 kw (2 HP) |
Coolant Pump
| 0.1 kw (1/8 HP) |
0.1 kw (1/8 HP) |
0.2 kw (1/4 HP) |
Blade Size |
4115 x 27 x 0.9 mm (162" x 1" x 0.035")
| 4900 x 34 x 1.1 mm (193" x 1.3" x 0.043") |
5980 x 41 x 1.3 mm (235" x 1.6" x 0.051") |
Blade Tension |
Manual
| Hydraulic |
Index Length |
Single Feed |
-
|
Max Index Times |
-
|
Saw Frame Angle |
-60° ~ 0° ~ +45° Bidirection
|
Angle Swivel |
Manual
|
Angle Display |
Angle Scale
|
Table Height |
770 mm (30.3")
| 830 mm (32.7")
| 900 mm (35.4")
|
Vise Clamping Type |
Hydraulic (Rack)
|
Machine Weight |
800 kg (1760 lb)
| 1500 kg (3300 lb)
| 2650 kg (58300 lb)
|
Floor Space (L x W) |
2200 mm x 2100 m (86.6" x 82.7")
| 2400 mm x 2450 m (94.5" x 96.5")
| 3000 mm x 2850 m (118" x 112")
|
2. Miter Cutting Band Saw: Model HW450 / 650 & HW500 / 900
HW450/650
HW500/900
STANDARD FEATURES:
Free pressure compensation unit
Column type down feed system
Guide arm locked by manual (for HW450/650)
Guide arm locked by hydraulic (for HW500/900)
Vertical clamping device
Full stroke vise hydraulic clamp
Hydraulic work lift roller with manual feeding - infeed side
Auxiliary vise (for HW500/900)
Powered angle setting with LED display (for HW500/900)
One piece of bimetal saw blade
One set of tools with tool box
OPTIONAL EQUIPMENT:
Automatic chip conveyor (for HW450/650)
Dead roller table 2 M long
Dead roller table 3 M long
Power feeding roller table, 3M long
Auxiliary vise (outfeed side) (for HW450/650)
Variable vice pressure
Powered angle setting with LED display (for HW450/650)
Hydraulic work lift roller with manual feeding - outfeed side
Hydraulic work lift roller with power feeding - infeed side hydraulic worklift roller with power feeding - outfeed side
TECHNICAL SPECIFICATIONS:
Model |
HW450/650 |
HW500/900 |
Capacity |
0 |
• ▪ |
450 mm (17.7") 650 x 420 mm (25.6" W x 16.5" H) |
520 mm (20.5") 900 x 500 mm (35.4" W x 19.7" H) |
±45° |
• ▪
| 410 mm (16") 410 x 420 mm (16" W x 16.5" H) |
500 mm (20") 510 x 500 mm (20" W x 20" H) |
-60° |
• ▪ |
260 mm (10.2") 260 x 420 mm (10.2" W x 16.5" H) |
- |
Blade Speed |
20 to 80 m/min (65 to 260 fpm) |
Motor |
Blade Drive
| 3.7 kw (5 HP) |
5.5 kw (7.5 HP) |
Hydraulic Pump
| 1.5 kw (2 HP) |
2.2 kw (3 HP) |
Coolant Pump
| 0.1 kw (1/8 HP) |
0.2 kw (1/4 HP) |
Blade Size |
5450 x 41 x 1.3 mm (214.6" x 1.6" x 0.05")
| 7200 x 54 x 1.6 mm (283.4" x 2.1" x 0.063") |
Blade Tension |
Hydraulic |
Saw Frame Angle |
-45° ~ 0° ~ +60°
| -45° ~ 0°
|
Angle Swivel |
Manual
| Hydraulic
|
Angle Display |
Angle Scale
| LED
|
Table Height |
800 mm (31.5")
|
Vise Clamping Type |
Hydraulic (Full Stroke)
|
Machine Weight |
4300 kg (9460 lb)
| 7000 kg (15420 lb)
|
Floor Space (L x W) |
2950 mm x 2650 m (116" x 104")
| 3950 mm x 3200 mm (156" x 126")
|
3. Miter Cutting Band Saw: Model S-6235HA
S-6235HA
STANDARD FEATURES:
Hydraulically controlled dual vise clamping system - 2 step
Shuttle type automatic feed (only for 0° ~ 60°)
Blade cleaning brush
Bidirection angle swivel -60° ~ 0° ~ +45° with scale indicator
Blade breakage detector device
Automatic work height control device
PLC control
Work light
Roller stock table, 2M long
One piece of bimetal saw blade
One set of tools with tool box
OPTIONAL EQUIPMENT:
Automatic chip conveyor
Nesting fixture for bundle cutting
Variable vise pressure
NC control
TECHNICAL SPECIFICATIONS:
Model |
S-6235HA |
Capacity |
0 |
• ▪ |
350 mm (14") 620 x 350 mm (24.5" W x 14" H) |
±45° |
• ▪
| 350 mm (14") 420 x 350 mm (16.5" W x 14" H) |
-60° |
• ▪ |
300 mm (12") 290 x 350 mm (11.5" W x 14" H) |
Blade Speed |
20 to 100 m/min (65 to 330 fpm) |
Motor |
Blade Drive
| 3.7 kw (5 HP) |
Hydraulic Pump
| 0.75 kw (1 HP) |
Coolant Pump
| 0.1 kw (1/8 HP) |
Blade Size |
4900 x 34 x 1.1 mm (193" x 1.3" x 0.043")
|
Blade Tension |
Hydraulic |
Index Length |
Single Feed
| 600 mm (23.6") |
Max Index Times
| 9 |
Saw Frame Angle |
-60° ~ 0° ~ +45° Bidirection
|
Angle Swivel |
Manual
|
Angle Display |
Angle Scale
|
Table Height |
830 mm (32.7")
|
Vise Clamping Type |
Hydraulic (Full Stroke 2 Step)
|
Machine Weight |
2200 kg (4840 lb)
|
Floor Space (L x W) |
4530 mm x 2100 m (178.3" x 82.7")
|